FX Airguns

Click on the images to the left for bigger image.

The easiest most convenient and affordable way to charge your airguns. Patented three way system gives you 200 bar with ease. fill pressure 250 bar.

Features: Pressure gauge, moisture trap, particle filter (replaceable), and bleed valve.
Connections: DIN or Kevlar hose 0,5 m with 1/8” thread.

The new Turbo Pump is equipped with a patented 4 stage system. It has a unique gearing system that gives you the opportunity to gear down when it gets rough. It allows the user to choose if they want high volume (300 cc) with lower pressure Or low volume (200 cc) with higher pressure.

Features: Pressure gauge, moisture trap, particle filter (replaceable), and bleed valve. Unique Gearing system.

Sport Utility Rings have a unique wrap around design, are available in 1 inch diameters, fits any scope size (low, medium or high) and comes in matte black.

Objective Lens Diameter
Diopter Adjustment Range
Reticle I
Parallax
Body Tube Diamater
Total Length
Total Weight
Lens Coating

44 mm
-2.0 / +2.0
lluminated Red
30 yds-infinity
25.4 mm
412 mm
500 g
Fully Multi-coated

Shrouded barrel and barrelsupport. Available as addition on some of the FX rifles.

Contoured recessed latches. Padlock tabs for added security Strong and ribbed construction. Inner dimension: 121x27x7 cm.

Suits all FX Rifles with ½” thread on the muzzle. Mounted as standard on the Verminator.

This gauge suits all our front airtubes. You can use it with or without barrel support.

Available for all guns with removable air tube.
Front tubes:
240cc – 500mm
185cc – 390mm
150cc – 320mm
65cc – 140mm
45cc – 100mm.
Rear bottles: 500cc and 400cc

Maximum fill pressure 220bar.

High performance domed (round tip) air rifle pellets.
Recommended for all FX products.
Calibre:
5,52 (.22) weight 1,030 grams (16 grains)
4,52 (.177) weight 0,547 grams (8,44 grains)

Complete charging device for your scuba tank.

Features: Pressure gauge, particle filter (replaceable), and bleed valve.
Connections: Kevlar hose 0,5 m with 1/8” thread / FX Fill probe and DIN in scuba end.

Allows easy addition of a sling, strap, bipod or other accessory without any modification to the fore end of the stock.
Suitable for all airtubess with a diameter of 33 mm.

Requires newer version air cylinder with raised section on end cap. Available for standard (14 mm). barrel and shrouded versions (16 mm). Replacement end cap is required if an older version of cylinder. Is to be used with barrel support.

Add this to your existing airtube for additional volume. Approximately 5-10 more shots at high power. 45cc - 100 mm.

Various adapters DIN to 1/8”. External moisture trap, easy to service and clean, 1/8” connections.

Recommended for all FX guns. Outstanding cleaning without damage to the barrel. Available in 4,5 (.177) and 5,5 (.22).

Spare magazines in calibre 4,5 (.177) and 5,5 (.22).
State type of gun when ordering.